Digimatic Micrometers Series 293 -  MDC-Lite

• Provided only with a zero-set key for easy origin setting.

• A ratchet stop or friction thimble for a constant measuring force.

• Measurement readout with large characters on the LCD screen.

• No spindle clamp. No data output

• Supplied in fitted plastic case

Digimatic Micrometers Series 293 - IP54 ABSOLUTE Quickmike

• The Quickmike provides a speedy spindle feed of 10mm / .4” per thimble rotation as compared to the conventional micrometer with 0.5mm / .025” per rotation. Its wide 30mm / 1.2” measuring range allows various workpieces with different shapes to be measured quickly.
• Non-rotating spindle and the new ratchet friction thimble.
• Speedy spindle feed of 10mm/rev.
• With absolute linear scale.
• IP54 dust/water protection (when not connected with data output cable).
• With SPC data output.
• With a standard bar to set the origin point (for models with a range over 30mm / 1.2”).
• Supplied in fitted plastic case.

Digimatic Micrometers Series 293 - IP 65 Dust/Water Protection (up to 12")
Digimatic Micrometers Series 293 (12" - 20")
 

• Micrometers up to 12" have IP65 protection level, enabling use in environments exposed to cutting oil, etc (Anti-corrosion treatment is required after use).

• Measurement data output function is available with a water-resistant connection cable.

• Auto power ON/OFF function. • Certificate of inspection* is included. (50mm/2” or less range models) (*It is not the type used to obtain calibration certificates - Long Form Certification extra).

• With a standard bar except for 0-25mm/0-1" model.

• Supplied in fitted case. Plastic case up to 150mm/6",
  Wooden box over 150mm/6"

Series 293 Coolant Proof up to 100mm/4"

Series 293 over 100mm/4"

293-334-30

Digital Micrometers Series 293 - IP 65 Coolant Proof QuantuMike

• Faster measurement with 2mm per rev. instead of the standard 0.5

• A patented ratchet thimble mechanism helps ensure repeatability

• A function lock helps prevent error IP-65 protection level

• Certificate of inspection is provided.

• With a standard bar except for 0-25mm/0-1" model

• Supplied in fitted plastic case.

• IP65 water/dust protection for models with a range up to 12in/300mm.

• Wide measuring range with interchangeable anvils.

• With a Ratchet Stop for constant force.

• Supplied with zero-setting standards bar for each range.

• With SPC output.

• Supplied in fitted wooden case.

• Accuracy: �(4+R/75)�m, R=max. range (mm) [.00016” �.00004 (L/3)”] L = Max Range (Inch) - excluding quantizing error

Digital Models Listed below

• Easy-to-read with large Vernier on the thimble

• With a standard bar except for 0-25mm/0-1in model.

• With SPC output

• Supplied in a fitted plastic case.

• IP65 water/dust protection.

• The anvil and spindle have a small diameter for measuring splined shafts,slots, and keyways.

• With Ratchet Stop for constant force.

• With SPC output.

• With a standard bar except 0-25mm and 0-1” model.

• Spline: Type "A" (�3mm -10mm) - Type "B" (�2mm - 5mm)

• Supplied in fitted plastic case.

• IP65 water/dust protection..

• Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions.

• 15 degree and 30 degree measuring points are available.

• The measuring points (carbide-tipped) have approximately 0.3mm / .012” radius.

• With Ratchet Stop for constant force.

• With SPC output .

• With a standard bar except 0 - 25mm and 0 - 1” model.

• Supplied in fitted plastic case.

• IP54/65 water/dust protection.

• Measures the height of crimp contacts.

• With Ratchet Stop for constant force.

• With SPC output.

• Supplied in fitted plastic case.

• For 3 flutes cutting head

• Measures the outside diameter of cutting heads (such as taps, reamers, end mills) with odd number of flutes.

• With Ratchet Stop for constant force.

• Supplied with setting standard.

• V-anvils with a centerline grove are available. They are useful for measuring pitch diameters of of taps which have a small diameter by using single-wire method.

• With SPC output

• Supplied in fitted plastic case.

Digital Micrometers Series 395 - Spherical Face Micrometers

• IP65 water/dust protection.

• Designed to measure the wall thickness of various tubing.

• The Tube Micrometers have two combinations of measuring faces (carbide tipped): spherical-flat type, and spherical type.

• Cylindrical anvils (perpendicular) are also available.

• With Ratchet Stop for constant force.

• With SPC output.

• With a standard bar except 0 - 25mm and 0 -1” model.

• Supplied in fitted plastic case.

• IP65 water/dust protection

• Measures tubing thickness, shoulder edge distance, rivet head height, etc. with interchangeable anvils (flat anvil, rod anvil, V-anvil).

• Supplied with Flat Anvil (201216) and Rod Anvil: �3mm/.118” rod anvil (201217) for 0-25mm/0-1” models, �5mm/.197” (201379) for 25-50mm / 1-2” model.

• With special Disk Anvils. The Uni-Mike is used as a height micrometer. The disks have a lapped, mirror surface.

• With a standard bar except 0-25mm and 0 -1” model.

• Supplied in fitted plastic case.

• Measures thickness of sheet metal, paper, plastic, and rubber parts.

• With Ratchet Stop for constant force.

• With a standard bar except for 0 - 25mm / 0 - 1” model.

• IP65 water/dust protection (Series 389*). *Except for 389-713

• Supplied in fitted plastic case.

• The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach areas.

• With Ratchet Stop for constant force.

• Speedy spindle feed of 10mm / .4”/rev. (Quickmike type).

• With a standard bar except 0 -25mm and 0 - 1” model.

• Supplied in fitted plastic case.

• Diameter of measuring disk: 20mm / .787”

• 0.7mm / .028” (1mm: models over 100mm) edge thickness to enter narrow recesses.

• With Ratchet Stop for constant force.

• With a standard bar except for 25mm / 0 - 1” model.

• With SPC output.

• Supplied in fitted plastic case. (Over 100mm models supplied wooden cases)

• The Disk Micrometer is designed to easily measure root tangent length of spur gears and helical gears.

• Non-rotating spindle eliminates torque on work piece.

• With standard bar except 0 - 15mm, 0 - .6” 0 - 25mm, 0 - 1”, 0 - 300mm & 0 - 1.2” model

• Speedy spindle feed of 10mm/rev. (Quickmike type).

• Diameter of measuring disk: 20mm / .787”

• With Ratchet Stop for constant force.

• With SPC output .

• Supplied in fitted plastic case

369-350

Digital Micrometers Series 324 - Gear Tooth Micrometers
Interchangeable Ball Anvil-Spindle Tip Type

• IP65 water/dust protection 

• Measures over-pin diameter of gears with precision steel (carbide) ball-tipped measuring faces.

• With a standard bar except 0-25mm and 0-1” model

• Interchangeable ball anvil-spindle tips for various gear modules (0.5 - 5.25) are optional.

• With Ratchet Stop for constant force.

• With SPC output

• Supplied in fitted plastic case (0-150mm /4” model 008 150mm model are wooden case)

Digital Micrometers Series 326 - Screw Thread Micrometers
Interchangeable Anvil-Spindle Tip Type

• IP65 water/dust protection
• 60 degree or 55 degree V-anvil and conical spindle (interchangeable) are optional, which are made of high-grade steel, hardened and precision ground.
• With Ratchet Stop for constant force.
• With SPC output
• With a standard bar except 0-25mm / 0-1 in model
• Supplied in fitted plastic case.

• With Ratchet Stop for constant force.

• With SPC output

• With a standard bar except 0 - 25mm and 0 - 1” model.

• Supplied in fitted plastic case.